[Explained] Fix Brother Printer Drum Error Instantly

If you haven’t cleaned the printer for a long time, then dust gets to accumulate on the corona wire on the drum unit. Thus, this can lead to “drum error” which appears in the form of a message on the display.

If you are presently reading the “Brother Printer Drum Error” on the screen then the only way out to fix this problem is to clean the drum unit. And to do that, you need to move to the next section. 

Here, we are mentioning the essential ways to clear the drum unit of the brother printer. You need to implement these steps from time to time to avoid this problem in the near future.

Reasons Behind the Drum Error

Not just dust, but there are several other factors that can lead to Brother printer drum error. In the brother printer, there is an ink and toner cartridge installed in the device. Besides, there are drum units and other manufacturers which have chips inside them. 

Basically, this chip plays a huge role after installing the printer. But if accidentally these chips get corroded or start to malfunction then you can face printer issues. As a result, you will get the error message on the device. 

How to Fix Drum Error on Brother Printer: Step-by-Step Guide

In this section, we are mentioning the best possible solutions to fix the Drum error form the Brother Printer. You just need to implement the mentioned steps as instructed below.

Step 1:

The first thing that you need to do is to clear the drum unit of the Brother printer and open the front cover of the drum unit first. Next, you need to remove the drum unit and toner cartridge assembly out of the printer. 

Make sure that you have placed the drum and toner assembly properly so that it won’t get scattered. 

Step 2: 

Now, you need to clean the corona wire that is inside the drum unit. To do that you need to first slide the green tab from one side to the other many times. 

Now, take the green tab to its home position. Make sure you have placed the green tab properly, or else you will get a vertical stripe until the next time when you will print out from the Brother printer.

Step 3: 

Take the drum and toner cartridge and place it to the right. You will see two small staple shaped metals and a rod with a stick outside the drum. Clean those parts carefully and make sure no dirt remains there. Use a dry cloth to clean these parts of the drum unit. 

Step 4:

Now, after cleaning the internal parts of the drum unit, put back the toner and drum assembly as it was before and close the front cover next. 

Additional Guide:

In some of the Brother printers, you will get a “Clear option” to clear the drum unit. In that case, you need to tap on the “Clear” first and then you will be promoted with an “Accepted” message. 

Tap on that message to confirm the action. By just doing this, you will be able to clear the drum units of the Brother Printer. 

Frequently asked Questions (FAQs)

How to reset the Drum error from the Brother printer?

To reset the Bother printer, you need to follow the below-mentioned steps:

  1. Hold the 1 key on the Brother Printer. 
  2. Use the scroll up and down keys to see the printer.’
  3. Yow will be promoted with the “Accepted” message on the screen. Tap on the message to confirm your action. 

Now, close the front cover, and the drum unit of the brother printer will get reset. And you will be able to eliminate the drum error from the device. 

What will happen if you are using a faulty drum?

If you are using a faulty drum in the Brother printer, you will get a low-quality print. Not only this, using a damaged drum unit will give you blurry and black spot prints, faded images. So, in that case, you need to replace the drums of the Brother printer so that you can avoid such issues in the near future.

Leave A Comment

Related Posts